Avtech room alert 4e User Manual And Reference Manual page 21

However, if you connect your Room Alert 4E to a managed switch that controls your network
traffic, you may need to change these settings:
1. In "MTU Size," you may leave the default, 1024, or enter a value as low as 512.
2. You may uncheck "Auto Negotiate" and choose:
• For "Speed," 100 Mbps or 10 Mbps.
• For "Duplex," "Full" or "Half."
3. In "Gratuitous ARP Broadcasts," you may leave the checkbox at the default (enabled) or
uncheck the box to disable.
Accept Changes
4. Click
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
5. Click Save Settings
will automatically reboot and commit your changes.
AVTECH Software, Inc.
at the bottom of your screen to temporarily save your settings.
in the navigation bar to the left of your screen. Your Room Alert
Room Alert 4E
17