Simple Network Management Protocol (Snmp) - Avtech room alert 4e User Manual And Reference Manual

Hide thumbs Also See for room alert 4e:

Table of Contents

Room Alert 4E

Simple Network Management Protocol (SNMP)

Because your Room Alert 4E is fully SNMP-compliant, you have the option to monitor it with a

-party monitoring application capable of performing SNMP queries. You may configure the

Room Alert 4E to send SNMP Traps in response to a change in alarm states to up to three host

systems running 3

-party SNMP monitoring applications.

If you use a 3

-party SNMP monitoring application:

• Obtain the Room Alert 4E MIB files through your customer account at

AVTECH.com/Downloads

Otherwise, your application cannot properly translate the data it receives in the

SNMP Trap.

• Ensure that your application uses SNMPv1.

• Note that your Room Alert communicates with your SNMP monitoring application

using the standard port for the SNMP protocol, 161.

Navigate to

Settings

Order from www.sellcom.com/avtech.html

800-SELLCOM 919-401-0067

and load them into your SNMP monitoring application.



SNMP

to open the SNMP Settings screen.

AVTECH Software, Inc.

Table of Contents

Do you have a question about the room alert 4e and is the answer not in the manual?