Sun Oracle SPARC T4-1B Installation Manual page 45

Terminal Type
Network?
Multiple Network
Interfaces
DHCP?
Host Name
IP Address
Subnet?
Subnet Netmask
IPv6?
Security Policy
Confirm
Name Service
NFSv4 Domain Name
Time Zone (Continent)
Time Zone (Country or
Region)
Time Zone
Date and Time
root Password
Related Information
"Configure the OS" on page 37
■
"Install Oracle Solaris Software From the Network" on page 38
■
"Assign a Static IP Address to the SP" on page 40
■
Select a terminal type that corresponds with your terminal device.
Select Yes.
Select the network interfaces that you plan to configure. If you are not sure, select
the first interface in the list.
Select Yes or No according to your network environment.
Enter the host name for the server.
Enter the IP address for this Ethernet interface.
Select Yes or No according to your network environment.
(If subnet was Yes) Enter the netmask for the subnet for your network
environment.
Specify whether or not to use IPv6. If you are not sure, select No to configure the
Ethernet interface for IPv4.
Select either standard UNIX security (No) or Kerberos Security (Yes). If you are not
sure, select No.
Review the onscreen information and change it if needed. Otherwise, continue.
Select the name service according to your network environment.
Note – If you select a name service other than None, you will be prompted for
additional name service configuration information.
Select the type of domain name configuration according to your environment. If
you are not sure, select Use the NFSv4 domain.
Select your continent.
Select your country or region.
Select the time zone.
Accept the default date and time or change the values.
Enter the root password twice. This password is for the superuser account for the
Oracle Solaris OS on this server. This password is not the SP password.
Configuring the Oracle Solaris OS 39