Powering On The Server Module For The First Time - Sun Oracle SPARC T4-1B Installation Manual

Powering On the Server Module for
the First Time
After you install the server module in the modular system, you power on the server
module host for the first time.
Based on the connection method you selected from
Server Module During Installation" on page
to power on the server module:
Description
Through a browser that is on the same
network as the CMM, use the CMM ILOM
web interface.
Through a terminal window on a system that
is on the same network as the CMM, use the
CMM ILOM CLI.
Through a terminal device connected to the
CMM SER MGT port, use the CMM ILOM
CLI.
Through a terminal device connected to the
front panel of the server module (using the
dongle cable), use the server module SP
ILOM CLI.
Related Information
"Configuring the Oracle Solaris OS" on page 37
■
"Installation Task Overview" on page 1
■
Server Module Administration Guide
■
"Plan Communication With the
15, perform one of the tasks in this table
Links
"Method 1a – Power On the Host Through
the CMM (Web Interface)" on page 28
"Method 1b – Power On the Host Through
the CMM (CLI)" on page 29
"Method 2 – Power On the Host Through the
CMM SER MGT Port (CLI)" on page 31
"Method 3 – Power On the Host Through the
Front Panel (SP CLI)" on page 34
27