Configuring The Oracle Solaris Os - Sun Oracle SPARC T4-1B Installation Manual

Configuring the Oracle Solaris OS

After you install the server module in the modular system, you can power on the
server for the first time and begin configuration.
Description
Configure the preinstalled Oracle Solaris OS.
Install your own version of the Oracle
Solaris OS.
Related Information
"Installation Task Overview" on page 1
■
▼ Configure the OS
This procedure assumes that you are using the Oracle Solaris OS software that was
preinstalled on the drive in slot 0 of the server module. If you are installing the
Oracle Solaris OS another way, complete the Oracle Solaris OS installation then
resume this procedure.
●
Respond to configuration questions in the Oracle Solaris installation process.
See the configuration choices you planned, based on
Parameters" on page
Links
"Configure the OS" on page 37
"Oracle Solaris Configuration Parameters"
on page 38
"Assign a Static IP Address to the SP" on
page 40
"Install Oracle Solaris Software From the
Network" on page 38
"Oracle Solaris Configuration Parameters"
on page 38
"Assign a Static IP Address to the SP" on
page 40
38.
"Oracle Solaris Configuration
37