Handling Precautions; Esd Precautions - Sun Oracle SPARC T4-1B Installation Manual

"Tools Needed for Installation" on page 14
■
"Plan Communication With the Server Module During Installation" on page 15
■
"Dongle Cables" on page 17
■

Handling Precautions

Use both hands to carry the server module.
■
Extend the ejector arms on the front panel only while they need to be in that
■
position to perform a step in a task.
Related Information
"Physical Specifications" on page 7
■
"Inventory" on page 12
■
"ESD Precautions" on page 13
■
"Tools Needed for Installation" on page 14
■
"Plan Communication With the Server Module During Installation" on page 15
■
"Dongle Cables" on page 17
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded
antistatic wrist strap, foot strap, or equivalent safety equipment to prevent ESD when
you install the server module.
Caution – To protect electronic components from ESD, which can permanently
disable the system, place components on an antistatic surface, such as an antistatic
discharge mat, an antistatic bag, or a disposable antistatic mat. Wear an antistatic
grounding strap connected to a metal surface on the chassis when you work on
system components.
The following figure shows the modular system chassis ground connector for which
you can connect antistatic equipment.
Preparing for Installation 13