Sun Oracle SPARC T4-1B Installation Manual page 31

10. Monitor status messages when power is applied to the server module (panel 4).
As soon as you insert the server module into a chassis that is connected to power,
the server module goes into standby mode and its SP initializes. The front panel
LEDs blink three times, then the green OK LED on the front panel blinks for a few
minutes. See "Front and Rear Panel Components" on page
Related Information
"Prepare the Modular System and Server Module" on page 21
■
"Install Optional Components" on page 23
■
"Front and Rear Panel Components" on page 4
■
4.
Installing the Server Module 25