Sun Oracle SPARC T4-1B Installation Manual page 36

3. Log in to the CMM with the SSH client.
$ ssh root@cmm_ip_address
Replace cmm_ip_address with the IP address of the CMM.
4. Type your password for the CMM ILOM root account when prompted.
The factory default ILOM root password is changeme, but might have been
changed in your environment.
Password: CMM_ILOM_password
Oracle(TM) Integrated Lights Out Manager
Version 3.x.x
...
Warning: password is set to factory default.
->
You are now logged in to the CMM ILOM CLI.
Note – When you are ready to log out of the CMM ILOM, type exit.
5. Navigate to the server module SP.
-> cd /CH/BLn/SP/cli
Replace n with a number that identifies the chassis slot in the modular system
where the target server module is installed.
6. Access the server module SP.
-> start
Are you sure you want to start /CH/BLn/SP/cli (y/n)? y
start: Connecting to /CH/BLn/SP/cli as user root
If you are prompted for a password for the root user on the server module SP,
type changeme (the factory default password).
You are now logged into ILOM on the server module SP.
30 SPARC T4-1B Server Module Installation Guide • May 2012