Table of Contents
Advertisement
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation B-1965FC's display
stays on after the last button is pressed on the control panel.
1.
Go to the Back Light main level.
2.
Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product's UID.
1.
Go to the Information main level.
2.
Select Fixture Hours, Version, Device ID, or UID.
Factory Reset
This option restores the Ovation B-1965FC to factory default settings.
1.
Go to the Factory Setting main level.
2.
Select No or Yes.
Web Server
The Ovation B-1965FC Web Server can be accessed by any computer on the same network as the
product. It allows network access to system information, settings such as control protocol and starting
address, color output testing, and the ability to change the Web Server password.
1.
Connect the product to a Windows computer with a network cable.
2.
On the computer, set the IP address of the new network to have the same first 3 digits as the IP
address of the product (See
3.
Enter the IP address of the product into the URL bar of a web browser on the computer.
4.
Enter both the User Name and Password as admin to log in.
Home
The Web Server Home page displays the details of all available control protocols, as well as the technical
specifications for the Ovation B-1965FC.
Settings
The Web Server Settings page provides options for control. From the drop-down menus, the Protocol,
Universe, IP Address, Start Address, Personality, Dimmer Mode, and PWM Frequency can all be edited.
Click Save Settings to send the new configuration to the product.
Output
On the Web Server Output page, an output test of the product's LEDs can be performed, by either editing
the values of each LED manually (by typing the number or moving the fader), or by selecting a sample
color. The page will show the currently output color on the bottom left. To stop the output test, click Click to
Stop.
Security
The Web Server Security page gives the option to change the password to the connected product's web
server. Enter the old password (admin, by default) and the new password twice, then click Save Settings
to change the password.
Page 30 of 35
IP
Address).
Ovation B-1965FC User Manual Rev. 1
O
PERATION
Advertisement
Table of Contents
