O
PERATION
1.
Go to the White Balance main level.
2.
Select Manual to continue to adjust the white balance or Off to default to the original factory
setting.
3.
Select a color (Red, Green, Blue, or Amber).
4.
Select a color value (125-255).
5.
Repeat for the other colors.
Dimmer Profiles
This setting determines how fast the output of the COLORdash Par-Q12 IP changes when you modify the
output value. This setting provides four different options to simulate the dimming curve of an incandescent
lighting product.
•
Go to the Dimmer Mode main level.
•
Select a dimmer curve (OFF, Dimmer 1, Dimmer 2, or Dimmer 3).
OFF: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer
curve, DIM1 being the fastest.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the COLORdash Par-
Q12 IP.
1.
Go to the LED Frequency main level.
2.
Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, or 25Khz).Fan Mode
This setting determines how the fan speed on the COLORdash Par-Q12 IP is set.
1.
Go to the Fan Mode main level
2.
Select Auto (fan speed will increase or decrease based on product temperature) or On (fan
speed will always be at maximum).
Back Light
This setting allows for selection of the amount of time the back light on the COLORdash Par-Q12 IP's
display stays on after the last button is pressed on the control panel.
1.
Go to the Back Light main level.
2.
Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product's UID.
1.
Go to the Information main level.
2.
Select Fixture Hours, Version, or UID.
Factory Reset
This option restores the COLORdash Par-Q12 IP to factory default settings.
1.
Go to the Reset Factory main level.
2.
Select No or Yes.
COLORdash Par-Q12 IP User Manual Rev. 1
Page 15 of 19