Table of Contents
Advertisement
Control Personalities
This setting allows you to choose a particular control personality.
1.
Go to the Personality main level.
2.
Select the desired number of cells to be controllable (1 Cell, or 7 Cell).
Select the desired personality (see table below).
DMX-VCW-CCT
RGB EXT
RGBA EXT
RGBAL EXT
RGBAL Fine
RGBAL FULL
•
See the
for each personality.
•
Make sure that the starting addresses on the various products do not overlap due
to the new personality setting.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison.
1.
Go to the Start Address main level.
2.
Select the starting address (001–510).
The highest recommended starting address for each DMX mode is as follows:
Personality
1 Cell DMX-VCW-CCT 3CH
1 Cell RGB 3CH
1 Cell RGBA 4CH
1 Cell RGBAL 5CH
1 Cell RGB EXT 8CH
1 Cell RGBA EXT 9CH
1 Cell RGBAL EXT 10CH
1 Cell RGBAL Fine 10CH
1 Cell RGBAL FULL 17CH
Page 12 of 35
Mode
1-Cell
3CH
RGB
3CH
RGBA
4CH
RGBAL
5CH
8CH
9CH
10CH
10CH
17CH
Starting Address
section for the highest starting address you can select
Address
510
510
509
508
505
504
503
503
496
Personality
7 Cell RGB 21CH
7 Cell RGBA 28CH
7 Cell RGBAL 35CH
7 Cell RGB EXT 45CH
7 Cell RGBA EXT 52CH
7 Cell RGBAL EXT 59CH
7 Cell RGBAL Fine 70CH
7 Cell RGBAL FULL 96CH
Ovation B-1965FC User Manual Rev. 1
O
PERATION
7-Cell
N/A
21CH
28CH
35CH
45CH
52CH
59CH
70CH
96CH
Address
498
493
488
480
475
470
463
443
Advertisement
Table of Contents
