Table of Contents
Advertisement
O
PERATION
Main Level
LED
Frequency
Fan Mode
Display
Back Light
Universe
Ethernet
Setting
IP Address
Fixture Hours
Version
Information
Device ID
Factory
Setting
Configuration (DMX/Art-Net™/sACN)
Use control configurations to operate the product with a controller.
Control Protocol
This setting allows you to choose the protocol with which to control the Ovation B-1965FC.
1.
Go to the Protocol main level.
2.
Select the desired control protocol (DMX512, ArtNet, or sACN).
Ethernet Setting
Ethernet protocols (Art-Net™ and sACN) require the Universe and IP address to be set, as well as the
Starting
Address.
Universe
1.
Go to the Ethernet Setting main level.
2.
Select Universe.
3.
Set the Universe value (0–255 for Art-Net™, or 1–256 for sACN).
IP Address
1.
Go to the Ethernet Setting main level.
1.
Select IP Address.
2.
Set the IP address (000.000.000.000 to 255.255.255.255)
Ovation B-1965FC User Manual Rev. 1
Programming Levels
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Auto speed
On
Off
Normal
Inverted
On
10S
20S
30S
1 (DMX)
000-255 (Art-
Net™)
1-256 (sACN)
_ _ _._ _ _._ _ _._
_ _ _ _
V_._-V_ _
_ _ _ _ _ _ _ _ _ Shows product device ID
_ _ _ _ _ _ _ _ _ _
UID:
No
Yes
Description
Selects the PWM output frequency
Sets the fan to auto mode
Sets the fan to always on
Sets the fan to always off
Normal display orientation
Inverted display
Display backlight always on
Turns off display backlight after 10 sec of
inactivity
Turns off display backlight after 20 sec of
inactivity
Turns off display backlight after 30 sec of
inactivity
Sets universe for Art-Net™ or sACN
Sets IP address
_ _
Shows total product hours
Shows installed software version
Shows product UID
_ _
Resets to factory defaults
Page 11 of 35
Advertisement
Table of Contents
