Initial Setting - Mitsubishi Q64RD User Manual

5 UTILITY PACKAGE (GX Configurator-TI)

5.4 Initial Setting

5 - 12
[Purpose of setting]
Make initial setting for operating the Q64RD on each channel.
Refer to Section 5.1 for the initial setting parameter types.
This initial setting makes sequence program setting unnecessary.
[Startup procedure]
"Start I/O No. "
[Setting screen]
[Explanation of items]
(1) Setting contents
Set whether temperature conversion is enabled or disabled and the temperature
conversion method for each channel.
(2) Explanation of command buttons
Make text file
End setup
Cancel
POINT
Initial settings are stored in the intelligent function module parameters. After the
initial settings are written to the CPU module, they are validated by operating the
RUN-STOP switch as follows, STOP
OFF and then ON, or resetting the CPU module.
When using a sequencer program to write the initial settings, when the CPU is
switched from STOP to RUN the initial settings will be written, So ensures that
programming is carried out to re-execute the initial settings.
"Package name" "Module model name"
Outputs the screen display in text file format.
Confirms the setting data and ends the operation.
Cancels the setting data and ends the operation.
RUN
MELSEC-Q
Initial setting
STOP RUN, turning the power
5 - 12