When User Range Setting Is Used And Initial Setting Was Made With Gx Configurator-Ad; (Other System Is Available) - Mitsubishi Q64RD User Manual

7 ONLINE MODULE CHANGE

7.3.3 When user range setting is used and initial setting was made with GX Configurator-AD

(other system is available)

7 - 12
(1) Conversion disable
(a) Set the Conversion enable/disable designation (buffer memory address 0:
Un\G0) for all channel conversion disable and turn Operation Condition
Setting Request (Y9) from OFF to ON to stop conversion.
(2) Dismounting of module
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to
enter the "Online module change" mode, double-click the module to be
changed online to display the "Online module change" screen.
MELSEC-Q
7 - 12