Mitsubishi Q64RD User Manual page 73

6 PROGRAMMING
6 - 6
(b) Automatic refresh settings (refer to Section 5.5)
Set the CH.1 to CH.4 temperature measurement values and error code.
(c) Write of intelligent function module parameters (refer to
Section 5.3.3)
Write the intelligent function module parameters to the CPU module.
Perform this operation on the parameter setting unit selection screen.
(3) Program example
MELSEC-Q
[Error code indication and clear]
Outputs error code in BCD.
Turns off error clear request
when error occurred signal turns off.
6 - 6