Vega VEGAPULS 63 Operating Instructions Manual page 53

Antenna encapsulation
PTFE
PFA and PFA 8 mm
Vibration resistance
Electromechanical data - version IP 66/IP 67
Cable entry
Ʋ Double chamber housing
Spring-loaded terminals for wire cross-
section
Display and adjustment module
Voltage supply and data transmission
Indication
Adjustment elements
Protection rating
Ʋ unassembled
Ʋ mounted into the sensor without cover IP 40
Ambient temperature - Display and
adjustment module
Material
Ʋ Housing
Ʋ Inspection window
Voltage supply
Operating voltage
Ʋ Non-Ex and Ex-d instrument
Max. power consumption
Potential connections and electrical separating measures in the instrument
Electronics
Tested according to the guidelines of German Lloyd, GL directive 2.
13)
VEGAPULS 63 • 4 ... 20 mA/HART - four-wire
Version
Additional process seal,
FKM
Additional process seal,
EPDM
Standard
mechanical vibrations with 4 g and 5 ... 100 Hz
– 1 x cable gland M20 x 1.5 (cable: ø 5 ... 9 mm), 1 x
blind plug M20 x 1.5; plug M12 x 1 for VEGADIS 61
(optional)
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT, plug
M12 x 1 for VEGADIS 61 (optional)
or:
– 1 x plug (depending on the version), 1 x blind plug
M20 x 1.5; plug M12 x 1 for VEGADIS 61 (optional)
< 2.5 mm² (AWG 14)
through the sensor
LC display in dot matrix
4 keys
IP 20
-20 ... +70 °C (-4 ... +158 °F)
ABS
Polyester foil
20 ... 72 V DC, 20 ... 253 V AC, 50/60 Hz
4 VA; 2.1 W
Not non-floating
Process temperature (measured on the process
fitting)
-20 ... +130 °C (-4 ... +266 °F)
-40 ... +130 °C (-40 ... +266 °F)
-40 ... +150 °C (14 ... +302 °F)
10 Supplement
13)
53