Vega VEGAPULS 63 Operating Instructions Manual page 31

Display - Backlight
Diagnosis - Peak value
VEGAPULS 63 • 4 ... 20 mA/HART - four-wire
6 Set up with the display and adjustment module PLICSCOM
The following indication values are available:
•
Height
•
Distance
•
Current
•
Scaled
•
Percent
•
Lin. percent
The selection "scaled" opens the menu items "Display unit" and
"Scaling". In "Display unit" there are the following options:
•
Height
•
Ground
•
Flow
•
Volume
•
Without unit
Depending on selection, the different units are in turn available.
In the menu item "Scaling", the requested numerical value with deci-
mal point is entered for 0 % and 100 % of the measured value.
There is the following relationship between the indication value in the
menu "Display" and the adjustment unit in the menu "Device settings":
•
Indication value "Distance": Presentation of the measured value in
the selected adjustment unit, e.g. m(d).
Displayed value
▼
Scaled
Display unit
▼
Volume
▼
l
Scaling
0 % = 0.0 l
100 % = 100.0 l
A background lighting integrated by default can be adjusted via the
adjustment menu. The function depends on the height of the supply
voltage. See "Technical data/Voltage supply".
Backlight
In the default setting, the lightning is switched off.
The respective min. and max. measured values are saved in the sen-
sor. The values are displayed in the menu item "Peak values".
•
Min. and max. distance in m(d)
31