Appendix D Disassembly And Disposal; Disassembly Procedure; Disposal - Mellanox Technologies SX1012 User Manual

Appendix D: Disassembly and Disposal
D.1

Disassembly Procedure

 To disassemble the system from the rack:
1. Unplug and remove all connectors.
2. Unplug all power cords.
3. Remove the ground wire.
4. Unscrew the center bolts from the side of the system with the bracket.
5. Slide the system from the rack.
6. Remove the rail slides from the rack.
7. Remove the caged nuts.
D.2

Disposal

Follow the instructions found at http://www.mellanox.com/page/dismantling_procedures for
proper disassembly and disposal of the switch, according to the WEEE directive.
Rev 1.4
Support the weight of the system when you remove the screws so that the system does
not fall.
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
Mellanox Technologies 105