Table of Contents
Advertisement
SOFTWARE SETUP
Transient recorder
(Waveform capture)
3–30
6.
The method of customizing the datalog view is the same as the Waveform Capture
described below.
The EnerVista SR3 Setup software can be used to capture waveforms (or view trace
memory) from the relay at the instance of a pickup, trip, alarm, or other condition.
•
With software running and communications established, select the Actual Values >
A3 Records > Transient Records menu item to open the Transient Recorder Viewer
window.
•
Click on Trigger Waveform to trigger a waveform capture. Waveform file numbering
starts with the number zero in the , so that the maximum trigger number will always
be one less than the total number of triggers available.
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES
Advertisement
Table of Contents
