Hardware Health Configuration - Supero SuperWorkstation 5037A-IL User Manual

Hardware Health Configuration


Fan Speed Control Mode
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase for effective
system cooling. Select "Full Speed" to allow the onboard fans to run at full speed
(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting
is recommended for special system configuration or debugging. Select "Standard"
for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the
needs between system cooling and power saving. This setting is recommended for
regular systems with normal hardware configurations. The options are Full Speed,
Standard, and Optimal.
CPU Temperature
This feature displays the CPU temperature status in text ("Low", "Medium" or
"High"):
Low – This level is considered as the 'normal' operating state. The CPU
temperature is well below the CPU 'Temperature Tolerance'. The mother-
board fans and CPU will run normally as configured in the BIOS (Fan Speed
Control).
User intervention: No action required.
Medium – The processor is running warmer. This is a 'precautionary' level
and generally means that there may be factors contributing to this condition,
but the CPU is still within its normal operating state and below the CPU
'Temperature Tolerance'. The motherboard fans and CPU will run normally
as configured in the BIOS. The fans may adjust to a faster speed depending
on the Fan Speed Control settings.
User intervention: No action is required. However, consider checking the CPU
fans and the chassis ventilation for blockage.
High – The processor is running hot. This is a 'caution' level since the CPU's
'Temperature Tolerance' has been reached (or has been exceeded) and may
activate an overheat alarm:
The information provided above is for your reference only. For more information
on thermal management, please refer to Intel's Web site at www.Intel.com.
System Temperature / Peripheral Temperature / PCH Temperature
This feature displays the temperature readings from the system sensor (chassis)
and peripheral devices.
7-15
Chapter 7: AMI BIOS