1-5
System Interface
The front of the chassis includes a power on/off push-button, including an LED
status light, and a reset button.
Power
The main power button is used to apply or remove power from the power supply
to the server system. Turning off system power with this button removes the main
power but keeps standby power supplied to the system. Therefore, you must unplug
the system before servicing.
This button features an LED that indicates hard drive activity as follows:
•
Blue – Power on
•
White – HDD activity
Reset
The reset button is located next to the power button.
Reset Button
Figure 2-1. Power Button/LED Location
Power Button
1-5
Chapter 1: Introduction