Table 6-7. Remote Access Configuration Submenu (Continued)
Menu Option
VT-UTF8 Combo Key
Support
Sredir Memory
Display Delay
Hardware Health Configuration
The menu options in the H
descriptions are shown in
Table 6-8. Hardware Health Configuration Submenu
Menu Option
CPU Overheat Alarm
CPU Information
ACPI Configuration
The menu options in the ACPI C
shown in
Table
Menu Option
ACPI Aware O/S
ACPI APIC
support
Headless Mode
ACPI Version
Features
Description
Allows you to Enable or D
VT100 terminals.
Use this setting to set the delay in seconds to display memory information.
Options are No Delay, 1
ARDWARE
Table
6-8.
Description
This option lets you specify the CPU Overheat Alarm to either The Early Alarm or
The Default Alarm.
Static CPU health information is shown in this submenu. The following
information is shown: CPU 1 Temperature, CPU Temperature, NB Temperature,
System Temperature, CPU1 Vcore, CPU2 Vcore, CPU1 Mem VTT, CPU2 Mem
VTT, CPU1 Mem, CPU2 Mem, 1.1V, 5V, 5VSB, +12V, 3.3Vcc and 3.3VSB.
ONFIGURATION
6-9.
Table 6-9. ACPI Configuration Submenu
Description
This option enables or disables ACPI support for the operating system. Options
are Yes or No.
Use this setting to include the ACPI APIC table pointer to the RSDT pointer list.
Options are Enabled and Disabled.
This setting Enables or Disables the Headless operation mode through ACPI.
This option enables RSDP pointers to the 64-bit Fixed System Description Table
and specifies the ACPI Version. Options are ACPI v1.0, ACPI v2.0 and ACPI
v3.0.
VT-UTF8 combination key support for ANSI/
ISABLE
, 2
and 4
SEC
SECS
SECS
H
C
EALTH
ONFIGURATION
submenu and their descriptions are
6-9
Chapter 6: BIOS
.
submenu and their