Table of Contents
Advertisement
SuperServer E200-8B User's Guide
iSCSi Configuration
iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI Initiator in IQN
format. Once the name of the iSCSI Initiator is entered into the system, configure
the proper settings for the following items.
Add an Attempt
Delete Attempts
Change Attempt order
Intel®I210 Gigabit Network Connection--00:25:90:90..
PORT CONFIGURATION MENU
NIC Configuration
Link Speed
This feature allows the user to set the Network Interface Connection speed for a
LAN port specified by the user. The options are Auto Negotiated, 10 Mbps Half,
10 Mbps Full, 100 Mbps Half, and 10 Mbps Full.
Wake On LAN
Select Enabled for Wake_On_LAN support, which will allow the system to "wake
up" when an onboard LAN device receives an incoming signal. The options are
Enabled and Disabled.
Blink LEDs
This feature indicates the LAN ports that are connected to the network using blinking
LED indicators.
5-20
Advertisement
Table of Contents
