Table of Contents
Advertisement
Chapter 5: BIOS
Slot1 PCI-E 2.0 x2 (in x8) OPROM
Use this feature to enable or disable PCI-Express slot Option ROM support to boot
the computer using a device installed on the slot specified by the user. The options
are Disabled, Legacy, EFI, and EFI and Legacy.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using an
iSCSI device installed in a LAN port specified. Select PXE (Preboot Execution
Environment) to boot the computer using a PXE device installed in a LAN port
specified. Select Disabled to prevent system boot using a device installed in a LAN
port. The options for Onboard LAN1 Option ROM are Disabled, PXE and iSCSI.
The options for Onboard LAN2 Option ROM are Disabled, and PXE.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
Ipv4 PXE Support (Available when Network Stack is set to Enabled)
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot
support. If this feature is set to Disabled, Ipv4 PXE boot option will not be supported.
The options are Enabled and Disabled.
5-19
Advertisement
Table of Contents
