Supero SuperServer E200-8B User Manual page 78

SuperServer E200-8B User's Guide
PCIe/PCI/PnP Configuration

This feature allows the user to set the PCI/PnP configurations for the following items:
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow the
PCI cards that do not contain their own VGA color palette to examine the video
cards palette and mimic it for proper color display. The options are Disabled and
Enabled.
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space
If 64bit PCI decoding is supported by the system. The options are Disabled and
Enabled.
Marvell SATA Controller
Select Enabled to support the onboard Marvell SATA controller to use PEX8605
Port 3. The options are Enabled and Disabled.
Onboard LAN1/Onboard LAN2
Select Enabled to enable a LAN port specified by the user. The options are Enabled
and Disabled.
Option ROM Execution Policy
Video OPROM
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and Legacy Video OPROM. Select Legacy Only to boot the system using
a legacy video device installed on the motherboard. The options are Do Not Launch,
UEFI Only and Legacy Only.
Storage OPROM
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and Legacy Storage OPROM. Select Legacy Only to boot the system
using a legacy storage device installed on the motherboard. The options are Do
Not Launch, UEFI Only and Legacy Only.
Other PCI Device ROM
This feature selects a PCI device OPROM to launch for system boot if this device
is not a network, mass storage, or video device. The options are UEFI Only and
Legacy Only.
5-18