Table of Contents
Advertisement
SATA Mode (Available when the item: Serial-ATA is enabled)
This item selects the mode for the installed SATA drives. The options are IDE Mode,
and AHCI Mode.
If the item above -SATA Mode Select is set to AHCI, the following items are
displayed:
Serial-ATA Port 0/ Serial-ATA Port 1
Select Enabled to enable a SATA port specified by the user. The options are
Enabled and Disabled.
If the item above - SATA Mode Select is set to IDE, the following items are
displayed:
Serial-ATA Port 0/ Serial-ATA Port 1
Select Enabled to enable a SATA port specified by the user. The options are
Enabled and Disabled.
Trusted Computing (Available when a TPM device is detected
by the BIOS)
Configuration
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled,
onboard security devices will be enabled for TPM support to enhance data
integrity and network security. Please reboot the system for a change on this
setting to take effect. The options are Enabled and Disabled.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance
system data security. Please reboot your system for any change on the TPM
state to take effect. The options are Disabled and Enabled.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security
device for system data integrity. You system will reboot to carry out a pending
TPM operation. The options are None, Enable Take Ownership, Disable Take
Ownership, and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
Current Status Information
This item displays the status of the TPM support on this motherboard.
5-17
Chapter 5: BIOS
Advertisement
Table of Contents
