Exposure Menu - Eneo PXD-2080MIR User Manual

Mega pixel network dome camera
Hide thumbs Also See for PXD-2080MIR:
Table of Contents

Advertisement

EXPOSURE Menu

EXPOSURE
Factory
Descriptions
Default
SHUTTER
AUTO
1. SHUTTER is recommended to set to AUTO instead of 1/50s (1/60s) for 1.3MP ver. and 1/25s
(1/30s) for 2MP ver. if auto iris lens is equipped.
2. Set to FLK (Flickerless mode) if TV system is US but power is 50Hz. The sensitivity will be lower
about 30% at low light in FLK mode.
3. AUTO - Shutter varies linearly between 1/50s(60s)~1/50000s for 1.3MP ver. and
1/25s(30s)~1/50000s for 2MP. AUTO shutter mode combined with auto iris lens may extend the
dynamic range but it is NOT recommended due to the cause of horizontal colour bar noise for the
bright scene under florescent or similar lights.
4. At x2~x30, DSS (Digital Slow Shutter) is operating at the selected frame integration rates regard-
less of the light level.
DC lens must be used for these settings to get a proper video level.
1. SHUTTER should be set to AUTO to get a proper video level with the automatic shutter if a fixed
iris lens is equipped.
2. Shutter varies linearly between 1/50s(60s)~1/50000s for 1.3MP ver. and 1/25s(30s)~1/50000s
for 2MP.
3. Color rolling or Video level hunting under Fluorescent or similar lighting may occur in this configu-
ration.
4. Any other fixed shutter settings are not recommended with a fixed iris lens.
AGC
20
AGC default is 20 and can be set between 1-32.
When AGC is equal to or lower than 13, DAY/NIGHT function becomes disabled and changes to
COLOR mode forcibly if DAY/NIGHT was AUTO mode.
Other DAY/NIGHT mode such as EXT, COLOR, B/W keeps its mode and does NOT change even
though AGC is lower than 13.
SENS-UP
AUTO
SENS-UP here stands for the maximum limit of integration rate of frame by DSS (Digital Slow Shut-
ter) operation in the low light.
If set to AUTO, maximum integration limit for SENS-UP can be set to x2, x4, x6, x8, x10, x15, x20 or
x30 in SENS-UP menu.
The integration frames vary automatically within the maximum limit according to the light level when
light becomes low and SENS-UP is AUTO.
The higher sens-up rate, the higher sensitivity but the slower refresh rate.
Some white dots may appear by sense-up due to the long accumulation by a long shutter period.
BRIGHT-
30
Controls the brightness of video.
NESS
The higher value, the brighter video.
Brightness is adjusted by controlling the iris for the auto iris lens or the shutter speed for the fixed
iris lens.
To enter EXPOSURE menu, press ● at MAIN>EXPOSURE.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents