Exposure Menu - Eneo VKC-1378/IR-316 Installation And Operating Instructions Manual

1/3” day/night colour camera
Table of Contents

Advertisement

Available languages

Available languages

5.2 EXPOSURE Menu

To enter EXPOSURE menu, press button at MAIN > EXPOSURE.
EXPOSURE
Factory Default Descriptions
SHUTTER
1/60 (1/50)
AUTO
AGC
Middle
SENSE-UP
OFF or AUTO
BLC
OFF
D-WDR
OFF
) I f LENS at MAIN menu was set to DC, a fixed shutter is selectable from /60
(NTSC) or /50 (PAL), FLK, /50, /500, /000, /5000, /0000, /00000
and a fixed sense-up rate is selectable from x56, x8, x64, x3, x6, x8, x4, x.
At x~x56, DSS(Digital Slow Shutter) is operating with the selected frame
integration rates regardless of the light level.
When TV system is NTSC (PAL) and Main power is 50Hz (60Hz), set to FLK
(Flickerless mode). FLK makes the sensitivity lower about 30% at low light.
DC lens must be used for these settings to get a proper video level.
) I f LENS at MAIN menu was set to MANUAL, SHUTTER should be set to
AUTO to get a proper video level with the automatic shutter range between
/60(/50)~/00,000sec.
Colour rolling or Video level hunting under Fluorescent or similar lighting may
occur in this configuration. Any other fixed shutter settings require a manual iris
lens to control the amount of the incoming light.
) If DAY/NIGHT at MAIN menu was set to AUTO or NIGHT, AGC is not user adjustable.
) A GC can be set to MIDDLE, HIGH, OFF or LOW.
Settings are not available if DAY /NIGHT at MAIN menu is set to AUTO for
non-IR LED version.
SENSE-UP is available only when SHUTTER is /60(/50) or AUTO.
If set to AUTO, max. integration rate for DSS can be set to x, x4, x8, x6, x3,
x64, x8 or x56.
The integration frames vary automatically within the max. rate according
to the light level when light becomes low and DSS is operating.
The higher sense-up rate, the higher sensitivity but the slower refresh rate.
Some white dots may appear by sense-up due to CCD's long accumulation by a
long shutter period.
OFF, BLC and HSBLC are available.
See BLC & HSBLC menus at 5.. & 5.. for detail.
OFF disables HIGHLIGHT or D-WDR.
HIGHLIGHT compensates the highlight area a little from the washed out but the
amount of compensation for HIGHLIGHT is not adjustable.
If set to ON, the dark area is boosted up for the brighter compensation and the
above HIGHLIGHT compensation works at the same time.
LOW COMP. and HIGH SUP. can be set. See D-WDR menu at 5..3 for detail.
30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vkc-1378/ir-650

Table of Contents