Check System Requirements - TDT System 3 Installation Manual

System 3 Installation Guide
All of the accessory cables you will need to connect your system are included in
the shipping box. These may include fiber optic, power and USB cables.
Fiber Optic Cable
Other non-processor devices not shown might include a preamplifier,
headstage, data streamer and more. These modules are shipped loose.
When setting-up your system, we recommend starting with just the processors.
You can connect additional devices—such as preamplifiers—after the
processors and interfaces are set-up.
For more information about each device in your system, see the System 3
Manual.

Check system requirements.

Operating system:
Expansion slots:
The PO5 Optibit PCI interface card requires a 3.3 Volt
compliant PCI slot (v 2.2 or greater).
(Back of Computer)
AC Power Cable
TDT Software and the Optibit and USB interfaces
require Windows® 7 or Windows® 10.
Most PCs include PCI slots suitable for interface
operation.
PCI
USB Cable
21