Configuring The Vrrp; General Settings; Settings Per Port - Hirschmann PowerMICE User Manual

VRRP

6.1 Configuring the VRRP

With this dialog you can enter both general settings and settings for each port
for the VRRP.

6.1.1 General settings

V Function: Switch the VRRP function on and off.
V Version: Display the VRRP version.
V Send VRRP Master Trap: As soon as the Switch takes over the
VRRP master function, it sends a master trap.
V Send VRRP Authentication Trap: As soon as the Switch receives a
VRRP message with incorrect authentication, it sends a VRRP au-
thentication error trap.

6.1.2 Settings per port

Parameter
Module
Port
VRID
Function
Tab. 15: VRRP configuration table
84
Meaning
Module of the Switch
Port to which this entry applies
Virtual router ID
Switch the VRRP function at this port on and off
6.1 Configuring the VRRP
Redundanz L3P
Release 3.0 01/07