FLIR M400 Installation Manual page 48

Mounting holes per
customer supplied hardware
6 Places
Gasket, Top Down Riser
Socket Head Cap Screw with locking patch
M6 X 1.0
Length: 16 mm
316 Stainless Steel
6 places
Apply corrosion inhibitor (USS TEF-GEL)
Torque to 9.5 N-m (7 lb-ft)
Washer M6
316 Stainless Steel
6 places
Warning
Do not bottom fasteners in base.
Bolt length not to exceed 6 mm into base.
Electronics will be damaged by base penetration
Bolt torque not to exceed 9.5N-m (7 lb-ft).
Fasteners between Top
Down Riser and
mounting surface to be
supplied by the installer.
6 places
432-0012-00-12 Version 110
Figure A-2: M400 Top Down Riser Installation—Ball down
July 2016
Cable Port
Top Down Riser
FLIR PN 4141973
Highly recommended
for installations onto
metal surfaces
AS568-436 EPDM O-Ring
[5.85in ID x .275in DIA]
[49mm ID x 7mm DIA]
AS568-444 EPDM O-Ring
[7.72in ID x .275in DIA]
[96mm ID x 7mm DIA]
M400 Weight: <12.25 kg (27 lb)
48