Digital Video And Pc Interface; Flir Dnr400-Series Connection - FLIR M400 Installation Manual

Digital Video and PC Interface

Digital Video and PC Interface
A computer (PC) on the network can control and configure the camera using a web browser (see
"IP Interface and PC Operations" on page
streams are available on the Ethernet connection to a shipboard network for use by a video
management system (VMS) or a network video recorder (for example, FLIR DNR400 Series) to
record video streams and provide other features such as video storage and backup. Refer to the
documentation for the VMS or video recorder for operation and setup details.
Customer supplied
PC
Digital Video/Control
Network Video Recorder
Figure 2-2: Three-Station System with Video Recorder

FLIR DNR400-Series Connection

1. Open a web browser and enter the camera IP address to log in with the admin user name.
2. Ensure that the VMS Remote INTERFACE 1 driver (ONVIF v2.0) is enabled. Refer to
"Maintenance->Sensor->Communications->VMS Remote" on page
3. Connect the camera Ethernet to the switch, as shown in Figure 2-2.
4. Connect the video recorder on the same Ethernet network.
The DNR400 video recorder must be connected to the Internet to utilize
5. Follow the instructions in the VMS or video recorder documentation to discover the camera.
432-0012-00-12 Version 110
20). Additionally, both IR and DLTV digital video
Ethernet
PoE Switch
HD-SDI Video
July 2016
Analog Video
JCU II
Isolation
transformer
1 m or less
JCU II
33.
Customer supplied monitor
Customer supplied monitor
Dashed lines represent
connection to power
services.
18