FLIR M400 Installation Manual page 29

M400 Web Browser Interface
Setup->Surveillance->Auto Scan
The Relative Auto Scan (Surveillance mode) can be started and the settings changed from the
OSD menu, JCU II (UPB), or the web page.
The Absolute Auto Scan can be started and the parameters set in the web page, but Absolute
Auto Scan can also be started as an option in the Startup mode when the camera boots. Refer to
"Startup Mode" on page 34.
Setup->OSD
Make selections on the OSD Web page to set
the content of each level of Display Icons.
Scroll down and select to enable or hide each
icon for the Full, Minimal, and Custom icon
sets.
Choose Read to display the current settings.
Choose Save to save the current selections.
432-0012-00-12 Version 110 July 2016
To start Auto Scan:
select width and speed,
then select Start
Set Autoscan at Startup:
select speed,
select limits,
click Save
29