Enable Onvif V2.0 Driver - FLIR M400 Installation Manual

M400 Web Browser Interface
• The expert log in, shown below, can use the Live Video page, the Setup page, the
Maintenance page Server menus, and can reset the user password or select to allow the user
log in account to change their own password, as well as restrict access to specific IP
addresses.
Maintenance->Sensor->Communications->VMS Remote

Enable ONVIF v2.0 Driver

Enable the ONVIF driver to connect the camera to a VMS or a network video recorder.
1. On the Maintenance->Sensor->Communications->VMS Remote page, select INTERFACE 1.
2. Select Yes to enable driver.
3. Scroll down and select Save.
4. Stop and start the server to make the change effective.
Stop and start the server
432-0012-00-12 Version 110
Figure 3-5: Security Options Page (expert log in)
July 2016
Select Interface 1
for ONVIF driver
Scroll down
to Save
Select Yes to
enable driver
33