Banner DX80 Installation & Operation Manual page 18

9 Messages
Endpoint Node
RF link status messages
• RF OK –
• RF Sync –
• RF OFF –
• NO RF –
Warning / Error Messages
LOWBAT – Low battery condition, replace battery.
S FLT – Sensor response is outside of normal operating parameters.
P FLT – Parameter error in processing sensor status.
Gateway
ModBus errors
Banner Engineering Corp • Minneapolis, MN USA
Sensonix Incorporated • Plymouth, MN USA
Preliminary Information
www.bannerengineering.com
18 of 18
• Tel: 763.544.3164
• 763.519.7042
www.sensonix.com