Counter Screen - Panasonic KV-S8147 Operating Manual

5.3.3 Menu screen
Items
Tray Position 1 - Tray
Position 6
Roller Cleaning
Notification
Roller Replacement
Notification
Glass Cleaning
Notification
Select Counter
Count Only Mode
Shortcut
Key buzzers, error buzzers etc.
*1

5.3.3.2 Counter screen

Select the counter using
selection. The types of selectable counters are shown below.
Setting contents
Items
Scan Counter
User Counter
System Counter
After Clean Roller
Counter
After Replace Roller
Counter
Clear User Counter
30
Sets whether a specific height of the feed tray position can be selected using
or of the cursor button.
Enables (On) or disables (Off) the roller cleaning notification.
Enables (On) or disables (Off) the roller replacement notification.
Enables (On) or disables (Off) the glass cleaning notification.
Selects the counter from [Scan], [System] or [User] that appears on the Home
screen and the screen displayed during scanning.
Sets whether Count Only Mode (page 61) can be activated by holding the
Menu button ( ) for 1 second or more.
or of the cursor button, and press the Enter button (
The number of documents scanned during the scanning process. The scanned
quantity is cleared each time you start scanning.
The number of documents scanned until the counter is cleared by the user.
The number of documents scanned by the scanner since it was shipped from
the factory.
The number of documents scanned since clearing the counter after cleaning
the rollers. Clear after cleaning the rollers.
The number of documents scanned since clearing the counter after replacing
the rollers. Clear after replacing the rollers.
Sets the User Counter to zero (0).
Contents
Contents
) to complete your