Panasonic KV-S8147 Operating Manual page 75

10.
Clean the conveyor rollers and exit roller.
i.
Use the Roller Cleaning Paper (page 9) to wipe the dirt from the surfaces of the rollers.
ii.
Press the Start/Stop button (
iii.
Repeat these steps until all surfaces of all rollers are cleaned.
11.
Close the ADF door (page 34).
12.
Press the back button (
Note
•
Cleaning Mode can be started from User Utility. For details, refer to the User Utility help.
) on the scanner to rotate the rollers a small amount.
) to exit Cleaning Mode.
9.2.4 Cleaning Mode
75