5.3.1 Home screen
5.3.1 Home screen
If you press the Back button (
the Home screen.
Setting contents
Items
The height of the feed
tray
Paper thickness mode
The height of the exit
tray
26
) when the Menu screen or the Job screen is displayed, you will return to
Select using
or
of the cursor button.
You can adjust the height of the feed tray in regards to the quantity of
documents. For details, see "5.3.1.1 Adjusting the height of the feed tray"
(page 27).
You cannot make this selection while manual feeding is set.
Select using
or
of the cursor button.
Change the paper thickness setting when feeding thick paper causes double
feeding or feeding errors. For details, see "5.3.1.2 Changing the paper
thickness mode" (page 28).
You cannot make this selection while manual feeding is set.
The following functions are enabled only when the pre-imprinter is installed.
•
After pressing
of the cursor button for 1 second or more, the exit tray will
move up.
•
After pressing
of the cursor button for 1 second or more, the exit tray will
move down.
Contents