Opening The Imprinter Door; Opening The Pre-Imprinter Door; When Installing/Uninstalling The Imprinter Unit And Ink Cartridge - Panasonic KV-S8147 Operating Manual

6.5 Opening the imprinter door

6.5.1 Opening the pre-imprinter door

•
The procedure for opening the pre-imprinter door varies by purpose.
•
For details about operation panel, refer to "5 Operation Panel" (page 20).
6.5.1.1 When installing/uninstalling the imprinter unit and ink
cartridge
1.
Remove all documents from the exit tray.
2.
Press the menu button (
3.
Use or of the cursor button to select [Maintenance].
4.
Press the Enter button (
•
The Maintenance screen is displayed.
5.
Use or of the cursor button to select "Pre-Imprinter setting".
6.
Press the Enter button (
7.
Press the Start/Stop (
•
The exit tray moves up, and the unit powers off automatically. Pay attention that your fingers or
anything do not get pinched.
8.
Raise the exit tray ( ).
1
).
) to complete your selection.
) to complete your selection.
) button.
6.5 Opening the imprinter door
35