Panasonic KV-S1058Y Operating Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Scanner
  5. KV-S1058Y
  6. Operating manual

Panasonic KV-S1058Y Operating Manual

Hide thumbs Also See for KV-S1058Y:
Table of Contents

Advertisement

Quick Links

These instructions contain information on operating the scanner. Before reading these instructions, please read
the Quick Installation Guide enclosed with this unit.
Keep all documentation in a safe place for future reference.
Current model availability depends on your country/area. Please contact your dealer.
KV-S1057C / KV-S1027C only:
•
The scanner may be displayed on your computer as the "KV-S1057C MK2" / "KV-S1027C MK2".
•
When you download the driver from web site, download the driver for "KV-S1057C MK2" / "KV-S1027C MK2".
Operating Manual
Document Scanner
KV-S1058Y
Model No.
KV-S1028Y
KV-S1057C
KV-S1027C
KV-S1057C
KV-S1027C
KV-S1057C
KV-S1027C

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KV-S1058Y

Summary of Contents for Panasonic KV-S1058Y

  • Page 1 Operating Manual Document Scanner KV-S1058Y Model No. KV-S1028Y KV-S1057C KV-S1027C KV-S1057C KV-S1027C KV-S1057C KV-S1027C These instructions contain information on operating the scanner. Before reading these instructions, please read the Quick Installation Guide enclosed with this unit. Keep all documentation in a safe place for future reference.
  • Page 2 Introduction Introduction Thank you for purchasing a Panasonic Document Scanner. Trademarks • Microsoft , Windows , Windows Vista and Internet Explorer are either registered trademarks or ® ® ® ® trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 3 Operating Manual Documents Control sheet Image Capture Plus is a Panasonic original application for configuring advanced scanning settings. This tool is used when the scanner is connected via USB. This tool is used when the scanner is connected over a LAN.
  • Page 4 Introduction • Due to the slower speed of USB 1.1, it is recommended to use a USB 2.0 / USB 3.0 / USB 3.1 interface. • If you connect the unit to a USB hub, it is not guaranteed to work.

  • Page 5: Table Of Contents

    Table of Contents Table of Contents 1 Feature Highlights .................. 7 2 Before You Start ..................8 Precautions ........................8 Security Notice ......................10 2.2.1 Management of documents and scanned data ............10 2.2.2 Management of setting information ................10 Check the Accessories ....................
  • Page 6 Table of Contents 6.3.3.1 Installing the mixed batch card guide ................ 43 6.3.3.2 Removing the mixed batch card guide ..............45 6.3.3.3 Using the Mixed Batch Card Guide ................47 6.3.4 Using Control Sheets (ADF) ..................48 6.3.4.1 About Printing Control Sheets ................... 49 Using Push Scan ......................

  • Page 7: Feature Highlights

    1 Feature Highlights 1 Feature Highlights Network Function • This scanner can be connected directly to a network. Preset Scan • If you register scanning conditions in advance, you can scan directly to an FTP server, a shared folder (SMB), or e-mail without using a computer. High-speed Double Sided Scanning •...

  • Page 8: Before You Start

    2 Before You Start 2 Before You Start 2.1 Precautions Illegal Duplication It is unlawful to make duplicates of certain documents. Duplicating certain documents may be illegal in your country/area. Penalties of fines and/or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to duplicate in your country/area.
  • Page 9 • For details about the roller cleaning paper, please refer to the Safety Data Sheet (SDS). Please ask your Panasonic sales company about obtaining the Safety Data Sheet. • If the bag is left opened for a long period of time before using it, the alcohol will evaporate. Please use the roller cleaning paper immediately after opening the bag.

  • Page 10: Security Notice

    2.2 Security Notice 2.2 Security Notice Panasonic cannot be responsible for following types of damages. • Any damages due to misuse of this unit. • Any damages due to security or other network-related problems. (When this unit is connected to a network, it is the responsibility of the user to connect it to a network that implements appropriate security measures.)

  • Page 11: Check The Accessories

    2.3 Check the Accessories 2.3 Check the Accessories Check that all accessories are included before installing the unit. In the event that an item is missing, please contact your dealer. Accessory Name Notes USB cable — Software / Manual CD- Drivers, Applications, Utilities, Documents When the unit is shipped, this is stored in the feed Mixed batch card guide...

  • Page 12: Location Of Controls

    3 Location of Controls 3 Location of Controls 3.1 Main Unit 3.1.1 Front Document guides Mixed batch card guide When the unit is shipped, this is stored in the feed tray. For details, see "6.3.3 Mixed Batch Card Guide (ADF)" (page 43). Manual feed selector You can select the document feeding method.

  • Page 13: Rear

    3.1.2 Rear ADF door release : Push to open the ADF door. Feed tray : Load the documents with the surface to be scanned facing down. : Make sure to remove paper clips and staples from documents. Feed extension tray 3.1.2 Rear Security slot Use a commercially available security cable.

  • Page 14: Installation

    4 Installation 4 Installation 4.1 Required Space Around the Scanner In order to ensure proper operation, install the unit maintaining the proper distances from surrounding objects, as shown in the following illustration. 400 mm (16 in.) 238 mm (9.4 in.) 272 mm (10.7 in.) 750 mm...

  • Page 15: Moving The Unit

    4.2 Moving the Unit 4.2 Moving the Unit When moving the unit, hold the part as shown in the following illustration. Notice • Do not hold the feed tray when moving the unit. • Do not move the unit immediately from a cold place to a warm place. It may cause condensation, which may damage the unit.

  • Page 16: Installing The Software

    4.3 Installing the Software 4.3 Installing the Software Notice • Make sure to log on as an administrator to install the software. • Use only the power cord and the USB cable that are provided with the unit. The software on the enclosed Software / Manual CD-ROM can be installed on your computer. You can select from the 2 installation methods below, depending on your needs.
  • Page 17 4.3.1 In case of using this unit with a USB connection • When turning on the unit's power for the first time, set the date and time by using the cursor buttons, and then press the OK button. For details, see "6.1.4 Changing the date and time" (page 26).

  • Page 18: In Case Of Using This Unit With A Lan Connection

    4.3.2 In case of using this unit with a LAN connection 4.3.2 In case of using this unit with a LAN connection For details about network-related settings, consult your network administrator. Plug in the power cord and connect the LAN cable. Turn ON the unit's power (page 26).

  • Page 19: Viewing Operating Manual And Help Installed

    [Scanner Manuals]. Select the manual. • The manual will open. Note • In Windows 8 and Windows 10, select the [Panasonic Document Scanner] section on the Apps screen. 4.4.2 To view the help For Image Capture Plus Select [All Programs] [Panasonic] [Image Capture Plus] [Image Capture Plus Help].

  • Page 20: Operation Panel

    5 Operation Panel 5 Operation Panel LED (Red) Lights when an error occurs. LED (Green) Shows the scanner’s status. Power button ( ) For details, see "6.1.1 Turning ON/OFF the unit's power" (page 26). Cursor button Skip/Menu button ( • If you press this button after a double feed is detected and scanning has been paused, the document (or documents) detected as a double feed will be scanned, and then ejected from the scanner.

  • Page 21: About Led

    5.1 About LED 5.1 About LED The status of the scanner is displayed by the LED (Red) ( ) and the LED (Green) ( ), as shown in the table below: LED (Red) LED (Green) Status Power OFF Ready mode or Scanning Blinking (Fast) Warming up Blinking (Fast, 2 times consecutively)

  • Page 22: About Lcd

    5.2 About LCD 5.2 About LCD The status of the unit is displayed on the LCD as follows. Status The scanner is warming up. The USB cable and LAN cable are not connected. The USB cable is not connected when in USB mode. The LAN cable is not connected when in Network PC mode.

  • Page 23: Menu Screen

    5.3 Menu screen Examples of displays of scanner statuses are as follows. G: nn Group number (two-digit) and Group name of job. GROUP NAME Push Scan Mode: USB mode J: nn Job number (two-digit) and Job name. JOB NAME Push Scan Mode: USB Mode / Network PC mode PC: nn PC number (two-digit) and PC name.
  • Page 24 5.3 Menu screen Item Contents LCD Contrast Set the LCD contrast (5 levels). Roller Cleaning Enable (On) or disable (Off) the roller cleaning notification. Notification Roller Replacement Enable (On) or disable (Off) the roller replacement notification. Notification Glass Cleaning Enable (On) or disable (Off) the scanner's internal cleaning notification Notification function.
  • Page 25 5.3 Menu screen Item Contents AutoIP Enable (On) or disable (Off) Auto IP. If DHCP is disabled, this setting cannot be changed. This setting can also be changed from Network Setting Tool (page 79). IP Address Set the IP address. If DHCP is enabled, this will be set automatically and cannot be changed.

  • Page 26: Operation

    6 Operation 6 Operation 6.1 Basic Operations 6.1.1 Turning ON/OFF the unit's power Turning ON the unit's power Press the power button ( ). • The LED (Green) will flash and then turn on. Turning OFF the unit's power Press and hold the power button ( ) for 1 second or more to turn the unit off. 6.1.2 Returning from sleep mode Press any button other than the power button ( ) on the operation panel.

  • Page 27: Opening/Closing The Adf Door

    6.1.5 Opening/Closing the ADF door 6.1.5 Opening/Closing the ADF door Opening the ADF door Press the ADF door release ( ), and open the ADF door ( ). Closing the ADF door Push both sides of the ADF door down slowly until it clicks into place.

  • Page 28: Preparing Documents For The Adf

    6.2 Preparing Documents for the ADF 6.2 Preparing Documents for the ADF 6.2.1 About documents for the ADF Notice • Make sure to remove paper clips and staples from documents before scanning. Failing to do so can damage the unit, document, or both. •...
  • Page 29 6.2.1 About documents for the ADF Recommended paper types: • • High-quality woodfree paper Recycled paper • • Bond paper OCR paper • • Newspaper Bank checks Note • High-quality woodfree paper is the recommended paper type. Curl and Folding: Documents must also meet the following conditions: Feeding direction Less than...

  • Page 30: Compatible Card

    6.2.1 About documents for the ADF 6.2.1.2 Compatible Card The compatible card types for this unit are as follows. ISO format card: Size: 85.6 mm × 54 mm (3.4 in. × 2.1 in.) Thickness: 0.76 mm (0.03 in.) Embossed card up to 1.4 mm (0.055 in.) •...

  • Page 31: Carrier Sheet (Kv-Ss077)

    6.2.1 About documents for the ADF 6.2.1.4 Carrier sheet (KV-SS077) You can use an optional carrier sheet (KV-SS077) to scan passport. When using the carrier sheet, please note the following conditions for the documents. For details about compatible passport, refer to "6.2.1.3 Compatible Passport"...

  • Page 32: Incompatible Documents

    6.2.1 About documents for the ADF 6.2.1.5 Incompatible Documents The following types of documents may not scan properly: • Torn or frayed documents • Curled, wrinkled or folded documents • Carbon paper • Perforated or punched paper • Non-rectangular or irregularly shaped paper •...

  • Page 33: Notes About Documents For Scanning

    6.2.1 About documents for the ADF 6.2.1.6 Notes about Documents for Scanning • Depending on the paper type, scanning results may be poor when you scan incompatible documents, or even documents that should be compatible. If scanned images are skewed, paper jams occur, or double feeding occurs, try scanning again after doing the following: –...

  • Page 34: Loading Documents On The Adf

    6.2.2 Loading documents on the ADF 6.2.2 Loading documents on the ADF Pull out the feed extension tray in the direction of the arrow shown in the illustration below. Adjust the document guides ( ) slightly larger than the actual size of the documents. Raise the exit stopper.
  • Page 35 6.2.2 Loading documents on the ADF Pull out the exit tray ( ) and the exit extension trays ( , Fan the documents. • Documents that have been stapled together or stacked together (as in a file folder) will need to be separated.
  • Page 36 6.2.2 Loading documents on the ADF Carefully align the documents. • The documents feed better when the leading edges are aligned slantwise as shown in the illustration. Place the documents on the feed tray with the side to be scanned facing down. •...
  • Page 37 6.2.2 Loading documents on the ADF Adjust the document guides ( ) to the size of the documents to be scanned. Hold the exit stopper and adjust the exit extension trays ( , ) to match the size of the scanned documents.
  • Page 38 6.2.2 Loading documents on the ADF • When the documents are curled or a paper jam occurs, fold up the exit guides ( ) and then resume scanning.

  • Page 39: When Using The Carrier Sheet

    6.2.2 Loading documents on the ADF 6.2.2.1 When using the carrier sheet You can use an optional carrier sheet (KV-SS077) to scan passport. For details about the carrier sheet, refer to "6.2.1.4 Carrier sheet (KV-SS077) " (page 31). Set the manual feed selector to manual feeding (page 42). Place the carrier sheet ( ) on the feed tray with the surface to be scanned facing down as shown in the illustration.
  • Page 40 6.2.2 Loading documents on the ADF Insert the carrier sheet ( ) until it stops as shown in the illustration. Note • Make sure to insert the carrier sheet until it comes into contact with the paper feed roller.

  • Page 41: Scanning Documents

    6.3 Scanning Documents 6.3 Scanning Documents Load the documents (page 34). Open your scanning application and scan the documents. • For details about the application, refer to the help of each application. • You can also start up applications automatically to scan documents (push scan). For details about push scan settings, see "6.4 Using Push Scan"...

  • Page 42: Using Manual Feeding

    6.3.2 Using Manual feeding 6.3.2 Using Manual feeding You can select Manual feeding with the Manual Feed Selector. • : Manual feeding • : Automatic feeding When using manual feeding, the documents are scanned without separation. Place the documents on the feed tray one by one.

  • Page 43: Mixed Batch Card Guide (Adf)

    6.3.3 Mixed Batch Card Guide (ADF) 6.3.3 Mixed Batch Card Guide (ADF) No adjustment to the document guide is required when using the mixed batch card guide. The mixed batch card guide prevents a card from skewing when scanning paper documents and a card simultaneously. 6.3.3.1 Installing the mixed batch card guide The mixed batch card guide is stored inside the feed tray.
  • Page 44 6.3.3 Mixed Batch Card Guide (ADF) Attach the feed tray ( ) to the unit. Attach the mixed batch card guide ( ) to the unit.

  • Page 45: Removing The Mixed Batch Card Guide

    6.3.3 Mixed Batch Card Guide (ADF) 6.3.3.2 Removing the mixed batch card guide Remove the mixed batch card guide as shown in the following illustration. Remove the mixed batch card guide ( ) from the unit. Remove the feed tray ( ) from the unit. •...
  • Page 46 6.3.3 Mixed Batch Card Guide (ADF) Attach the mixed batch card guide ( ) to the feed tray ( ). Attach the feed tray ( ) to the unit.

  • Page 47: Using The Mixed Batch Card Guide

    6.3.3 Mixed Batch Card Guide (ADF) 6.3.3.3 Using the Mixed Batch Card Guide Set paper documents on the feed tray, and a card on the mixed batch card guide respectively. • The card set on the mixed batch card guide is fed after completing the paper document scanning. •...

  • Page 48: Using Control Sheets (Adf)

    6.3.4 Using Control Sheets (ADF) 6.3.4 Using Control Sheets (ADF) Placing a control sheet in the middle of documents lets you change the scanning conditions for pages scanned after the control sheet. Also, you can change the folder used to save the scan data of documents scanned after the control sheet.

  • Page 49: About Printing Control Sheets

    6.3.4 Using Control Sheets (ADF) 6.3.4.1 About Printing Control Sheets • Print the control sheet at the specified size; do not enlarge or reduce the size. • When printing the control sheet, make sure that the pattern is 25 mm (1 in.) from the top of the page and centered horizontally.

  • Page 50: Using Push Scan

    6.4 Using Push Scan 6.4 Using Push Scan This scanner has a push scan function to start scanning. There are 3 push scan modes. In ready mode, you can select the push scan mode by pressing the Skip/Menu button ( 6.4.1 USB mode Scanned data is pushed to the computer connected via USB.

  • Page 51: Network Pc Mode

    6.4.2 Network PC mode 6.4.2 Network PC mode Scanned data is pushed to a computer connected over the LAN. • Both the scanner and Image Capture Plus process the image. • A job should be registered in Image Capture Plus in advance. For details about registration, refer to the Image Capture Plus help.

  • Page 52: Preset Scan Mode

    6.4.3 Preset Scan mode 6.4.3 Preset Scan mode This mode pushes the scanned data to an FTP, a shared folder (SMB), or e-mail. • Only the scanner processes the image. • The available destinations for scanned images are FTP Servers, shared folders (SMB) and e-mail addresses.

  • Page 53: Configuration Web

    7 Configuration Web 7 Configuration Web Network settings for this unit can be configured using the web browser that was launched from Network Scanner Select Tool. Note Some settings can also be configured using the LCD on the unit. For details, refer to "5.3 Menu screen" (page 23).

  • Page 54: Basic Browser Operations

    7.3 Basic Browser Operations Server Register an SMTP server for sending e-mail. Register the shared folders (SMB) as destinations for Preset Scan. You can register 10 folders. Register FTP servers as destinations for Preset Scan. You can register 10 FTP servers. Administrator Configure settings for notifications, passwords, etc.

  • Page 55: Clearing Paper Jams

    8 Clearing Paper Jams 8 Clearing Paper Jams Torn paper, thin paper or paper that is creased on the top edge may cause paper jams. If a paper jam occurs, remove the jammed sheet according to the following procedure. Remove all documents from the feed tray. Open the ADF door (page 27).

  • Page 56: Care And Maintenance

    9 Care and Maintenance 9 Care and Maintenance 9.1 Cleaning the Outside of the Scanner Notice • Before moving the unit, be sure to unplug the power cord, USB cable and LAN cable. • Do not use commercially available cleaners, detergent, thinner, or benzine. (Doing so may cause deformation, discoloration, or damage.) •...

  • Page 57: Cleaning The Inside Of The Scanner

    9.2 Cleaning the Inside of the Scanner 9.2 Cleaning the Inside of the Scanner Prepare the following cleaning supplies. Soft and dry cloth (one that does not easily Used to clean the conveyor and scanning glasses. generate fibrous dust) Thin cotton swab Used to clean the double feed detectors and the starting sensors.

  • Page 58: Cleaning The Conveyor And Scanning Glasses

    9.2.1 Cleaning the Conveyor and Scanning Glasses 9.2.1 Cleaning the Conveyor and Scanning Glasses With a soft and dry cloth, wipe off any dirt on the conveyor ( ) and scanning glasses ( ). • If the dirt does not come off, use a soft, slightly damp cloth.

  • Page 59: Cleaning The Double Feed Detectors And Starting Sensors

    9.2.2 Cleaning the Double Feed Detectors and Starting Sensors 9.2.2 Cleaning the Double Feed Detectors and Starting Sensors Remove dust from the double feed detectors ( ) and starting sensors ( ) with a cotton swab.

  • Page 60: Cleaning The Rollers

    9.2.3 Cleaning the Rollers 9.2.3 Cleaning the Rollers Use the roller cleaning paper (KV-SS03) (page 9) to wipe dirt off from the surfaces of all rollers. Notice • Be careful not to damage any parts of the unit. Open the double feed prevention roller cover ( ). Remove the double feed prevention roller.
  • Page 61 9.2.3 Cleaning the Rollers Use the roller cleaning paper to clean the surface of the double feed prevention roller. • Wipe the entire surface of both rollers. Install the double feed prevention roller. • Align the shaft that is shaped as indicated by with the notch in the roller mount ( ), and then insert the shaft in the notch.
  • Page 62 9.2.3 Cleaning the Rollers Close the double feed prevention roller cover ( ) firmly. Notice • Be sure to close the double feed prevention roller cover until it clicks into place. Open the paper feed roller cover ( ).
  • Page 63 9.2.3 Cleaning the Rollers Use the roller cleaning paper to clean the paper feed roller. • Wipe the rollers from one end to the other (in the direction of the arrow) all the way around them, as shown in the illustration. Close the paper feed roller cover firmly.
  • Page 64 9.2.3 Cleaning the Rollers Use the roller cleaning paper to clean the surface of the free rollers ( ). • Wipe the rollers from one end to the other (in the direction of the arrow) all the way around them, as shown in the illustration.

  • Page 65: Cleaning Mode

    9.2.4 Cleaning Mode 9.2.4 Cleaning Mode Cleaning Mode can be used to help clean the conveyor rollers and the exit rollers. During Cleaning Mode, the conveyor rollers and the exit rollers rotate a small amount every time the Start/Stop button ( ) on the scanner is pressed.
  • Page 66 9.2.4 Cleaning Mode Note • Cleaning Mode can also be started from User Utility. For details, refer to the User Utility help.

  • Page 67: Clearing The Counter After Cleaning The Rollers

    9.2.5 Clearing the Counter After Cleaning the Rollers 9.2.5 Clearing the Counter After Cleaning the Rollers After cleaning the rollers, set the After Clean Roller Counter to zero (0) from the operation panel (page 20). Press and hold the Skip/Menu button ( ) for 1 second or more.

  • Page 68: Replacing The Rollers

    9.3 Replacing the Rollers 9.3 Replacing the Rollers As a rough guideline, we recommend replacing the paper feed roller and double feed prevention roller module after scanning 250,000 sheets of paper. ("250,000 sheets" is based on scanning high-quality woodfree paper. Depending on the type of paper and other factors, the actual lifetime of the rollers may be shorter.) You can check the number of sheets that have been scanned.
  • Page 69 9.3 Replacing the Rollers Install the double feed prevention roller. • Align the shaft that is shaped as indicated by with the notch in the roller mount ( ), and then insert the shaft in the notch. Push the shaft on the opposite side ( ) until it clicks into place. Close the double feed prevention roller cover ( ) firmly.
  • Page 70 9.3 Replacing the Rollers Open the paper feed roller cover ( ). Lift up the gear ( ) on the left side of the paper feed roller, and then remove the paper feed roller.
  • Page 71 9.3 Replacing the Rollers Remove the rubber rollers from the paper feed roller shaft. • Push the tab ( ) to remove the rubber roller ( ) from the paper feed roller shaft. Remove the other rubber roller ( ) in the same way. Take out the new paper feed rollers in the optional roller exchange kit.
  • Page 72 9.3 Replacing the Rollers Install the two new rubber rollers onto the paper feed roller shaft. • Make sure the left ( white) and right ( black) paper feed rollers are installed correctly. • After confirming the tabs ( ) of both rubber rollers are facing outwards, insert the rubber rollers onto the paper feed roller shaft until they click into place.
  • Page 73 9.3 Replacing the Rollers Close the paper feed roller cover ( ) firmly. Notice • Make sure to close both sides of the paper feed roller cover until they click into place. • After installing the paper feed roller, confirm that the paper feed roller can rotate in the feeding direction.

  • Page 74: Clearing The Counter After Replacing The Rollers

    9.3.1 Clearing the Counter After Replacing the Rollers 9.3.1 Clearing the Counter After Replacing the Rollers After replacing the rollers, set the After Replace Roller Counter to zero (0) from the operation panel (page 20). Press and hold the Skip/Menu button ( ) for 1 second or more.

  • Page 75: Appendix

    10 Appendix 10 Appendix 10.1 Troubleshooting If a problem occurs while the scanner is being used, check the following items and check the scanner status on the LCD or in User Utility. If the unit still malfunctions, turn it off, unplug the power cord and call for service.
  • Page 76 10.1 Troubleshooting Symptom Possible Cause Remedy Either disable the double feed A double feed is detected when The cards are set in portrait detection function or set the scanning cards. orientation. cards in landscape orientation. The document is wrinkled. Smooth out the document. The rollers are dirty.
  • Page 77 10.1 Troubleshooting Symptom Possible Cause Remedy The document guides are not Adjust the document guides adjusted to the size of the properly to the size of the document to be scanned, or the document to be scanned (page document to be scanned is set 34).
  • Page 78 10.1 Troubleshooting Symptom Possible Cause Remedy If the length of documents are The sound made by paper being less than about 148 mm (5.8 in.), ejected is higher than usual feeding speed control will be — when you scan short documents. activated for exiting documents;...

  • Page 79: Perform Network Settings With Usb Connection

    10.2 Perform Network Settings with USB Connection 10.2 Perform Network Settings with USB Connection You can connect the scanner to your computer with the USB cable, and then perform the following settings with Network Setting Tool. For details about network-related settings, consult your network administrator. Settings Item Description...

  • Page 80: Check The Event Settings For Push Scan

    10.3 Check the Event Settings for Push Scan 10.3 Check the Event Settings for Push Scan Check the following if an application does not start up after being set in Scan Button Setting Tool. Display the scan properties screen. • If you are using Windows 10: [Control Panel] [Devices and Printers], right-click the scanner icon, and then display the [Scan...

  • Page 81: Error Code And Error Messages

    10.4 Error Code and Error Messages 10.4 Error Code and Error Messages Error codes corresponding to the scanner status are displayed on the LCD. For details about the error codes and messages, check in User Utility. Error Code Cause Remedy The paper has jammed in the feed tray Open the ADF door, and remove the area.

  • Page 82: Available Functions When Scanning

    10.5 Available Functions When Scanning 10.5 Available Functions When Scanning The functions you can use when scanning differ depending on how you are using the scanner. For details, refer to the following table. Note • For details about the function names, refer to the help for Image Capture Plus, TWAIN, or ISIS. Pull scan Push scan (Using Image Capture Plus,...
  • Page 83 10.5 Available Functions When Scanning Pull scan Push scan (Using Image Capture Plus, • Preset Scan mode (FTP TWAIN, or ISIS) server, SMB folder, e-mail) Function name Push scan • USB mode • Network PC mode Border Removal Available ― Hole Removal Available ―...

  • Page 84: Uninstalling The Software

    In [Control Panel], open [Uninstall a program]. Uninstall the following software programs. – IDREngine – Image Capture Plus – KV-S1058Y / KV-S1057C MK2 / KV-S1028Y / KV-S1027C MK2 ISIS Driver – – OCREngine – Panasonic Scanner Manuals – Panasonic Document Scanner Device Driver –...

  • Page 85: Factory Reset

    10.7 Factory Reset 10.7 Factory Reset This function will erase all of the settings in the scanner and initialize it to the factory default settings. • This unit saves the information that you set, such as the network configuration, passwords, e-mail addresses, etc.

  • Page 86: Repacking Instructions

    10.8 Repacking Instructions 10.8 Repacking Instructions It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or ship the scanner, please follow these instructions. Note • Improper repacking of the scanner may result in a service charge to repair the scanner. •...

  • Page 87: Specifications

    The scanning speed differs depending on the host computer, the operating system, the application, the measuring method, the quantity of data in the image, and the paper type. The scanning speed depends on a measuring method of Panasonic. In case of using this unit with a LAN connection, the scanning speed may be slower due to network traffic.
  • Page 88 10.9 Specifications Using "Long Paper", you can scan long documents by splitting them into smaller parts. For details about "Long Paper", refer to the Image Capture Plus, TWAIN, or ISIS help. For details, see "6.2.1.2 Compatible Card" (page 30). Use the carrier sheet (KV-SS077) to scan passport (page 31). Paper less than 100 mm (3.9 in.) long or legal size paper: 75 sheets For details, see "9.3 Replacing the Rollers"...
  • Page 89 10.9 Specifications General KV-S1058Y KV-S1028Y KV-S1057C KV-S1027C Item KV-S1057C KV-S1027C KV-S1057C KV-S1027C External dimensions 300 mm × 272 mm × 238 mm (11.8 in. × 10.7 in. × 9.4 in.) (Width × Depth × Height) Weight 4 kg (8.8 lb.) AC 100 –...
  • Page 90 © Panasonic Corporation 2017 PNQX8548ZA PD0617AG0...

This manual is also suitable for:

Kv-s1028yKv-s1057c m2Kv-s1027c m2Kv-s1057c j2Kv-s1027c j2Kv-s1057c b2 ... Show all

Table of Contents