Opening The Post-Imprinter Door; Changing The Language Used On The Lcd - Panasonic KV-S8147 Operating Manual

6.5.2 Opening the post-imprinter door

6.5.2 Opening the post-imprinter door
•
Check that the unit has been turned off.
1.
Open the post-imprinter door.

6.6 Changing the language used on the LCD

You can change the language used on the LCD.
1.
Press the menu button (
2.
Press the Enter button (
3.
Press of the cursor button once.
4.
Use or of the cursor button to select a language used on the LCD.
5.
Press the Enter button (
38
).
) to complete your selection.
) to complete your selection.