9.3.1 Clearing the Counter After Replacing the Rollers
9.3.1 Clearing the Counter After Replacing the Rollers
After replacing the rollers, set the After Replace Roller Counter to zero (0) from the operation panel (page
20).
1.
Press the menu button (
2.
Use
or
of the cursor button to select "Counter".
3.
Press the Enter button (
4.
Use
or
of the cursor button to select "Clear Replace Roller Counter".
5.
Press the Enter button (
Note
•
The After Replace Roller Counter can also be cleared from User Utility. For details, refer to the User
Utility help.
82
).
) to complete your selection.
) to complete your selection.