Firmware Operation Mode - ICP DAS USA WF-2000 Series User Manual

2.6.2 Firmware Operation Mode

In the operation mode, users need to set the dip-switch to the "OP"
position as Figure 2-24 and reset the power, and the WF-2000 can run in
the operation mode. In this mode, user can use the WF-2000 series with a
computer or with another WF-2000 series module for wireless connection.
Figure 2-24: OP Position of Dip-Switch
WF-2000 Series DIO User's Manual (RevB1.0, Oct./2016) ------------- 22