Top Panel - ICP DAS USA WF-2000 Series User Manual

2.2 Top Panel

The WF-2000 top panel contains the Power/Signal connector and
operating mode Selector switch.
Power/RS-232
Connector
Operating Mode Selector Switch
FW mode: Firmware update mode
Move the switch to the OP position after the upgrade is complete.
OP mode: Firmware operation mode
In the WF-2000, the switch is always in the OP position. Only when updating the WF-
2000 firmware, the switch can be moved from the OP position to the FW position.
Table 2-3: Power/Signal Connector
Power/Signal connector
Pin Assignment
F.G
+Vs
GND
RxD
TxD
WF-2000 Series DIO
Figure 2-6: Top Panel of the WF-2000
User's Manual (RevB1.0, Oct./2016) ------------- 12
Operating Mode
Selector Switch
Description
Frame Ground
+10 ~ +30 VDC
Power / RS-232 GND
RS-232 RxD
RS-232 TxD