Specifications - ICP DAS USA WF-2000 Series User Manual

Built-in Multi-function I/O
Various I/O components are mixed with multiple channels in a single
module, which provides the most cost effective I/O usage and enhances
performance of the I/O operations.
Built-in Watchdog
Module Watchdog is a built-in hardware circuit that monitors the
operating status of the module and will reset the module if a failure occurs
in the hardware or the software.
1.3

Specifications

Table 1-1: System Specifications
Modules
Wi-Fi Interface
Antenna
Output Power
Receive Sensitivity
Standard Supported
Wireless Mode
Encryption
UART Interface
Connector
COM1
Baud Rate (bps)
Power
Input Voltage Range
Power Consumption
Mechanism
Installation
Dimensions (W x L x H)
Environment
Operating Temperature
Storage Temperature
Humidity
WF-2000 Series DIO
WF-2042 WF-2051
5 dBi (Omni-Directional)
Infrastructure & Limited AP
WEP, WPA and WPA2
5-pin screw terminal connector(TxD, RxD, GND)
1.5W 1.2W
33mm x 106mm x 120mm
User's Manual (RevB1.0, Oct./2016) ------------- 7
WF-2055
14 dBm @ 11Mbps
-93 dBm @ 11Mbps
IEEE 802.11b/g/n
RS-232
115200
10V ~ 30V
1.9W
DIN-Rail
℃ ℃
-25 ~ +75
-30℃ ~ +80℃
10% ~ 90%
WF-2060
1.6W