Canon ipf8300 User Manual page 334

Windows Software
Scaling
Note
• This is not displayed when a checkmark is placed in Borderless Printing.
Output Image Size
The output image size is displayed up to one place after the decimal point in millimeters.
Note
• When Paper Size is smaller than Output Image Size, part of the image may not print.
Paper Size
You can select the size of the print media.
Note
4
• This is not displayed when a checkmark is placed in Borderless Printing.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Orientation
This selects the print orientation.
The following settings are available for orientation.
Portrait
Landscape
Layout
You can select the print position of an image on the media.
The following settings are available for layout.
Layout
Upper-Left of Output Paper
Size
Center of Output Paper Size
Specify Print Start Position
316
Page Setup Sheet
Downloaded from ManualsPrinter.com Manuals
> Print Plug-In for Photoshop/Digital Photo Professional
Setting
*You can change the numbers by clicking either ▲ or ▼.
Setting
Prints the image on the media as it appears on the screen.
Prints the image on the media rotated 90 degrees.
Setting
Prints the image with fitting the top left of the active print area for Paper Size.
Prints the center of the image on the center of the selected Paper Size.
You can print with specifying the top and left printing start positions in From Top
Margin and From Left Margin for Paper Size.
From Top Margin
From Left Margin
>
Details
Details
Details
Input the margin from the top of the media in numbers.
*You can input between -9999 and 9999 mm.
Input the margin from the left of the media in numbers.
*You can input between -9999 and 9999 mm.
iPF8300