Hardware Options Installation; Introduction; Security Bezel Option; Drive Options - HP ProLiant DL60 Gen9 User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Security bezel option

The security bezel helps prevent unauthorized physical access to the front panel components.
The security bezel is only supported in servers using the quick-release latch rack ears.
Install the security bezel and then lock it with the key provided with the kit.

Drive options

The server supports up to four LFF hot-plug or non hot-plug drives.
The embedded storage controller supports SATA drive installation.
For SAS drive installation, install a Host Bus Adapter or a Smart Array Controller board option. For more
information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
Hardware options installation 36