To determine which fan blanks need to be removed to install the additional fans, see "Fan population
6.
guidelines."
Remove the fan blank.
7.
Install the fan.
8.
CAUTION: The fan does not have a fan guard. Special attention is needed when removing or
installing the fan to prevent finger injury.
Connect the fan cable to the system board.
9.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
Install the air baffle (on page 20).
10.
Install the access panel (on page 19).
11.
Do one of the following:
12.
Slide the server into the rack.
o
Hardware options installation 48