In a server that uses quick-release latch rack ears, if necessary, tighten the shipping screws.
o
If the rear panel cables were disconnected because a cable management arm is not in use, do the
5.
following:
Connect each power cord to the server.
a.
Connect all peripheral cables to the server.
b.
Power up the server (on page 15).
c.
Access the product rear panel
Opening the cable management arm
To access the server rear panel:
Release the cable management arm.
1.
Open the cable management arm. The cable management arm can be right-mounted or
2.
left-mounted.
Operations 17