Dimm Identification; Memory Configurations - HP ProLiant DL60 Gen9 User Manual

DIMM identification

To determine DIMM characteristics, see the label attached to the DIMM and refer to the following
illustration and table.
Item Description
Capacity
1
Rank
2
Data width on DRAM
3
Memory generation
4
Maximum memory speed 2133 MT/s
5
CAS latency
6
DIMM type
7
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).

Memory configurations

To optimize server availability, the server supports the following AMP modes:
•
Advanced ECC—Provides up to 4-bit error correction. This mode is the default option for this server.
•
Online spare memory—Provides protection against failing or degraded DIMMs. Certain memory is
reserved as spare, and automatic failover to spare memory occurs when the system detects a DIMM
that is degrading. This allows DIMMs that have a higher probability of receiving an uncorrectable
memory error (which would result in system downtime) to be removed from operation.
•
Mirrored memory—Provides maximum protection against failed DIMMs. Uncorrectable errors in one
channel are corrected by the mirror channel.
Advanced Memory Protection options are configured in the BIOS/Platform Configuration (RBSU). If the
requested AMP mode is not supported by the installed DIMM configuration, the server boots in Advanced
Definition
8 GB
16 GB
32 GB
64 GB
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
x4 = 4-bit
x8 = 8-bit
DDR4
2400 MT/s
P=15
T=17
R = RDIMM (registered)
L = LRDIMM (load reduced)
Hardware options installation 52